Canon MK3000 User Manual Download Page 126

Page: 126 / 203

122

Menu Bar

The menu bar displays the functions of the MK Desktop Utility. Click on a menu to display a
drop-down list of submenus.

NOTE

• Functions not supported by this printer are displayed in light gray.

■

[File] menu

New

Creates a new data list.

(P.125)

Open

Open an existing fi le or CSV fi le to load data.

(P.126)

Add

Open another fi le and add it to the data currently being edited.

(P.130)

Save

Overwrite and save the data currently being edited.

(P.131)

Save As

Save the data currently being edited in a separate fi le which you will
specify the name of.

(P.131)

Select printer

Select the printer to be used.

Print the data currently being edited.

(P.138)

Exit

Exits the MK Desktop Utility.

(P.120)

■

[Edit] menu

Undo

Invalidates the previous operation.

Redo

Re-enables the operation that was invalidated by "Undo."

Cut

Cuts the specifi ed content and pastes it to the clipboard.

Copy

Copies the specifi ed content to the clipboard.

Paste

Pastes the contents of the clipboard.

Delete

Deletes the specifi ed portion.

Numbering

Automatically create pages by assigning consecutive numbers or
letters to a fi xed string of characters.

(P.136)

Summary of Contents for MK3000












































































































































































































Search results

Summary of Contents for MK3000

Reviews:

Related manuals for MK3000

Brands by name

Popular brands

Canon MK3000, User Manual

Search results

Summary of Contents for MK3000

Reviews:

Related manuals for MK3000

Brands by name

Popular brands