Canon mg6850 series Online Manual Download Page 220

Page: 220 / 1068

Cleaning the Paper Feed Roller

If the paper feed roller is dirty or paper powder is attached to it, paper may not be fed properly.

In this case, clean the paper feed roller. Cleaning will wear out the paper feed roller, so perform this only
when necessary.

You need to prepare: three sheets of A4 or Letter-sized plain paper

1. Make sure that the power is turned on.

2. Flick the HOME screen, then tap

Setup

Using the Operation Panel

The setup menu screen will appear.

3. Tap

Maintenance

The

Maintenance

screen will appear.

4. Tap

Roller cleaning

The confirmation screen will appear.

5. Tap

Yes

6. Follow the message to remove any paper from the cassette, then push it back.

7. Tap

The paper feed roller will rotate as it is cleaned without paper.

8. Make sure that the paper feed roller has stopped rotating, then follow the message to load

three sheets of A4 or Letter-sized plain paper in the cassette.

9. Open the paper output tray gently.

10. Tap

The machine starts cleaning. The cleaning will be complete when the paper is ejected.

220

Summary of Contents for mg6850 series













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for mg6850 series

Reviews:

Related manuals for mg6850 series

Brands by name

Popular brands

Canon mg6850 series, Online Manual

Search results

Summary of Contents for mg6850 series

Reviews:

Related manuals for mg6850 series

Brands by name

Popular brands