Canon MG6600 Series Manual Download

Page: 185 / 745

Important

• You cannot print if the ink tank is installed in the wrong position. Be sure to install the ink tank in

the correct position according to the label on the print head holder.

• You cannot print unless all the ink tanks are installed. Be sure to install all the ink tanks.

7. Close the operation panel gently.

Caution

• When closing the operation panel, be careful not to get your fingers caught.

Important

• When opening or closing the operation panel, do not touch the buttons and touch screen on the

operation panel. Doing so may result in an unexpected operation.

Note

• If the error message appears after the operation panel is closed, take appropriate action.

A Message Is Displayed

• When you start printing after replacing the ink tank, the machine starts cleaning the print head

automatically. Do not perform any other operations until the machine completes the cleaning of
the print head.

• If the print head is out of alignment, as indicated by misaligned printed ruled lines or similar

symptoms,

align the print head

185

Summary of Contents for MG6600 Series










































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MG6600 Series

Reviews:

Related manuals for MG6600 Series

Brands by name

Popular brands

Canon MG6600 Series, Manual

Search results

Summary of Contents for MG6600 Series

Reviews:

Related manuals for MG6600 Series

Brands by name

Popular brands