manualshive.com logo in svg

Canon mg6400 series, Online Manual, Page: 97 / 318

Share
Download
Canon mg6400 series Online Manual Download Page 97

Front View

(1)

 operation panel

Use to change the settings of the machine or to operate it. Also, lift and open it to
replace an ink tank, to check the ink lamp, or to remove jammed paper inside the
machine.

Operation Panel

(2)

 document cover

Open to load an original on the platen glass.

(3)

 paper guides

Slide to align with both sides of the paper stack.

(4)

 feeder

Load various sizes or types of paper which you can use on the machine. Two or
more sheets of the same size and type of paper can be loaded at the same time,
and fed automatically one sheet at a time.

Loading Plain Paper / Photo Paper

Loading Envelopes

(5)

 front tray

Open to load paper or perform the print operation.

(6)

 paper support

Extend to load paper in the front tray.

(7)

 output tray extension

Open to support ejected paper.

97

Summary of Contents for mg6400 series































































































































































































































































































































Reviews:

No comments