manualshive.com logo in svg

Canon mg6400 series, Online Manual, Page: 192 / 318

Share
Download
Canon mg6400 series Online Manual Download Page 192

Cleaning the Paper Feed Roller

If the paper feed roller is dirty or paper powder is attached to it, paper may not be fed
properly.
In this case, clean the paper feed roller. Cleaning will wear out the paper feed roller, so
perform this only when necessary.

You need to prepare: three sheets of A4 or Letter-sized plain paper

1.

Make sure that the power is turned on.

2.

Select 

Roller cleaning

.

(1)

 Select 

 

Setup

 on the 

HOME

 screen.

LCD and Operation Panel

The setup menu screen will appear.

(2)

 Select 

 

Maintenance

, then press the 

OK

 button.

The 

Maintenance

 screen will appear.

(3)

 Select 

Roller cleaning

, then press the 

OK

 button.

The confirmation screen will appear.

(4)

 Select 

Yes

, then press the 

OK

 button.

3.

Clean the paper feed roller without paper.

(1)

 Follow the message to remove any paper from the front tray.

(2)

 Press the 

OK

 button.

The paper feed roller will rotate as it is cleaned.

4.

Clean the paper feed roller with paper.

192

Summary of Contents for mg6400 series































































































































































































































































































































Reviews:

No comments