manualshive.com logo in svg

Canon mg6400 series, Online Manual, Page: 190 / 318

Share
Download
Canon mg6400 series Online Manual Download Page 190

Cleaning the Exterior of the Machine

Be sure to use a soft and dry cloth such as eyeglasses cleaning cloth and wipe off dirt on
the surface gently. Smooth out wrinkles on the cloth if necessary before cleaning.

 Important

 Be sure to turn off the power and disconnect the power plug before cleaning the

machine.

 Do not use tissue paper, paper towels, rough-textured cloth, or similar materials for

cleaning so as not to scratch the surface. Paper tissue powder or fine threads may
remain inside the machine and cause problems such as print head blockage and poor
printing results. Be sure to use a soft and dry cloth.

 Never use volatile liquids such as thinners, benzene, acetone, or any other chemical

cleaner to clean the machine, as this may cause a malfunction or damage the surface
of the machine.

190

Summary of Contents for mg6400 series































































































































































































































































































































Reviews:

No comments