Canon mg6400 series Online Manual Download Page 160

Page: 160 / 318

Checking the Ink Status with the LCD on the Machine

Make sure that the power is turned on, and display the

HOME

screen.

If the

HOME

screen is not displayed, press the

HOME

button to display it.

Select

Setup

on the

HOME

screen.

LCD and Operation Panel

The setup menu screen will appear.

Select

Estimated ink levels

, then press the

button.

A symbol appears in the area

(A)

if there is any information about the remaining ink

level.

Example:

Ink tank is running low. Prepare a new ink tank.

Note

The above screen shows estimated ink levels.
Press the

HOME

button to exit

Setup

and display the

HOME

screen.

To display and print the model number of the ink tank, select

Ink number

pressing the right

Function

button.

You can also check the ink status on a screen of the LCD displayed while printing.
You can also check the ink status on the computer screen.

Checking the Ink Status from Your Computer

160

Summary of Contents for mg6400 series































































































































































































































































































































Search results

Summary of Contents for mg6400 series

Reviews:

Canon mg6400 series, Online Manual, Page: 160 / 318

Search results

Summary of Contents for mg6400 series

Reviews: