manualshive.com logo in svg

Canon mg6400 series, Online Manual, Page: 151 / 318

Share
Download
Canon mg6400 series Online Manual Download Page 151

Removing the Memory Card

 Important

 If you used the card slot as the memory card drive of a computer, you must perform the

"safe removal" operation on your computer before physically removing the memory card
from the machine.

Setting Up the Card Slot as the Memory Card Drive of the Computer

1.

Make sure that the 

Access

 lamp is lit, and remove the memory card.

Hold the part of the memory card that is protruding and remove it straightforward from
the machine.

 Important

 Do not remove the memory card while the 

Access

 lamp is flashing. The 

Access

lamp flashes while the machine is reading or writing data from/to the memory card.
If you remove the memory card or turn off the power while the 

Access

 lamp is

flashing, the data saved on the memory card can be damaged.

151

Summary of Contents for mg6400 series































































































































































































































































































































Reviews:

No comments