Home
/
Canon
/
mg6400 series
/
Online Manual

Canon mg6400 series, Online Manual, Page: 138 / 318

Share

Page: 138 / 318

Canon mg6400 series Online Manual Download Page 138

Loading Originals on the Platen Glass

You can load originals to copy or scan on the platen glass.

1.

Load an original on the platen glass.

(1)

Open the document cover.

(2)

Load the original WITH THE SIDE TO SCAN FACING DOWN on the

platen glass.

Originals You Can Load

Make sure of the proper position to load the original for each function.

How to Load Originals for Each Function

Important

Be sure to observe the following when loading the original on the platen glass.

- Do not place any objects weighing 4.4 lb (2.0 kg) or more on the platen glass.
- Do not put any pressure of 4.4 lb (2.0 kg) or more on the platen glass, such as

pressing down the original.

Failure to observe the above may cause the scanner to malfunction or the platen
glass to break.

2.

Close the document cover gently.

138

«
...
136
137
138
139
140
...
»

Summary of Contents for mg6400 series































































































































































































































































































































Reviews:

No comments