manualshive.com logo in svg

Canon MG3600 series, Online Manual

Share
Download
Canon MG3600 series Online Manual Download Page 225

Setting the Ink Cartridge to be Used

This feature enables you to specify the most appropriate FINE cartridge among installed cartridges
according to an intended use.
When one of the FINE cartridges becomes empty and cannot be replaced immediately by a new one, you
can specify the other FINE cartridge that still has ink and continue printing.

The procedure for specifying the FINE cartridge is as follows:

 Ink Cartridge Settings

1. Open the 

printer driver setup window

2. Click 

Ink Cartridge Settings

 on the 

Maintenance

 tab

The 

Ink Cartridge Settings

 dialog box appears.

3. Select the FINE cartridge to be used

Select the FINE cartridge to be used for printing and click 

OK

.

The specified FINE cartridge will be used from the next printing.

Important

• When the following settings are specified, 

Black Only

 does not function because the printer uses the

color FINE cartridge to print documents.

• Other than 

Plain Paper

, 

Envelope

, 

Ink Jet Hagaki (A)

, 

Hagaki K (A)

, 

Hagaki (A)

, or 

Hagaki

 is

selected for 

Media Type

 on the 

Main

 tab

•

Borderless

 is selected from the 

Page Layout

 list on the 

Page Setup

 tab

• Do not detach the FINE cartridge that is not in use. Printing cannot be performed while either FINE

cartridge is detached.

225

Summary of Contents for MG3600 series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands