manualshive.com logo in svg

Canon MG3600 series, Online Manual

Share
Download
Canon MG3600 series Online Manual Download Page 154

Loading Envelopes

You can load Envelope DL and Envelope Com 10.

The address is automatically rotated and printed according to the envelope's direction by specifying with the
printer driver properly.

Important

• Printing of envelopes from the operation panel or from a PictBridge (Wireless LAN) compliant device is

not supported.

• Do not use the following envelopes. They could jam in the machine or cause the machine to

malfunction.

• Envelopes with an embossed or treated surface
• Envelopes with a double flap
• Envelopes whose gummed flaps are already moistened and adhesive

1. Prepare envelopes.

• Press down on all four corners and edges of the envelopes to flatten them.

• If the envelopes are curled, hold the opposite corners and gently twist them in the opposite

direction.

• If the corner of the envelope flap is folded, flatten it.
• Use a pen to press the leading edge in the inserting direction flat and sharpen the crease.

The figures above show a side view of the leading edge of the envelope.

Important

• The envelopes may jam in the machine if they are not flat or the edges are not aligned. Make sure

that no curl or puff exceeds 0.1 inch (3 mm).

2. Open the front cover (A) gently, then extend the paper support (B).

154

Summary of Contents for MG3600 series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands