Canon MG2900 Series Online Manual Download Page 94

Page: 94 / 735

Operation Panel

* All lamps on the operation panel are shown lit in the figure below for explanatory purposes.

(1) ON button

Turns the power on or off. Before turning on the power, make sure that the document cover is closed.

Turning the Machine On and Off

(2) ON lamp

Lights after flashing when the power is turned on.

Note

• You can check the status of the machine by the

and

Alarm

lamps.

•

lamp is off: The power is off.

•

lamp lights: The machine is ready to print.

•

lamp flashes: The machine is getting ready to print, or printing is in progress.

•

Alarm

lamp flashes: An error has occurred and the machine is not ready to print.

•

lamp flashes and

Alarm

lamp flashes alternately: An error that requires contacting the service

center may have occurred.

If an Error Occurs

(3) Wi-Fi button

Hold down to automatically set up the wireless LAN connection.

(4) Wi-Fi lamp

Lights or flashes to indicate the wireless LAN status.

Lights:

Wireless LAN connection is enabled.

Flashes:

Printing or scanning over wireless LAN. Also flashes while configuring the wireless LAN
connection.

Summary of Contents for MG2900 Series
































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MG2900 Series

Reviews:

Brands by name

Popular brands

Canon MG2900 Series, Online Manual

Search results

Summary of Contents for MG2900 Series

Reviews:

Brands by name

Popular brands