Canon MG2900 Series Online Manual Download Page 347

Page: 347 / 735

Instructions for Use (Printer Driver)

This printer driver is subject to the following restrictions. Keep the following points in mind when using the
printer driver.

Restrictions on the Printer Driver

• With some applications, the

Copies

setting in the

Page Setup

tab of the printer driver may not be

enabled.
In this case, use the copies setting in the

Print

dialog box of the application software.

• If the selected

Language

in the

About

dialog box of the

Maintenance

tab does not match the

operating system interface language, the printer driver setup window may not be displayed properly.

• Do not change the

Advanced

tab items of the printer properties. If you change any of the items, you

will not be able to use the following functions correctly.
Also, if

Print to file

is selected in the

Print

dialog box of the application software and with applications

that prohibit EMF spooling, such as Adobe Photoshop LE and MS Photo Editor, the following
functions will not operate.

◦

Preview before printing

on the

Main

tab

◦

Prevention of Print Data Loss

in the

Print Options

dialog box on the

Page Setup

tab

◦

Page Layout

Tiling/Poster

Booklet

Duplex Printing (Manual)

Specify Margin...

Print from

Last Page

Collate

, and

Stamp/Background...

(

Stamp...

) on the

Page Setup

tab

◦

Print a pattern for color adjustment

on the

Color Adjustment

tab in the

Manual Color

Adjustment

dialog box

• Since the resolution in the preview display differs from the printing resolution, text and lines in the

preview display may appear different from the actual print result.

• With some applications, the printing is divided into multiple print jobs.

To cancel printing, delete all divided print jobs.

• If image data is not printed correctly, display the

Print Options

dialog box from the

Page Setup

tab

and change the setting of

Disable ICM required from the application software

. This may solve the

problem.

Note

•

Disable ICM required from the application software

cannot be used when the XPS printer

driver is used.

• Do not start up the Canon IJ Network Tool while printing.
• Do not print when the Canon IJ Network Tool is running.

Points to Note About Applications with Restrictions

• There are following restrictions in Microsoft Word (Microsoft Corporation).

◦ When Microsoft Word has the same printing functions as the printer driver, use Word to specify

them.

◦ When

Fit-to-Page

Scaled

, or

Page Layout

is used for

Page Layout

on the

Page Setup

tab of

the printer driver, the document may not print normally in certain versions of Word.

◦ When

Page Size

in Word is set to "XXX Enlarge/Reduce", the document may not print normally in

certain versions of Word.
If this happens, follow the procedure below.

1. Open Word's

Print

dialog box.

347

Summary of Contents for MG2900 Series
































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MG2900 Series

Reviews:

Brands by name

Popular brands

Canon MG2900 Series, Online Manual

Search results

Summary of Contents for MG2900 Series

Reviews:

Brands by name

Popular brands