Canon MG2900 Series Online Manual Download Page 262

Page: 262 / 735

Precautions for Safe Transport of the Machine

When relocating the machine, make sure of the following.

Important

• Pack the machine in a sturdy box so that it is placed with its bottom facing down, using sufficient

protective material to ensure safe transport.

• With the FINE cartridge left installed in the machine, press the

button to turn off the power. This

allows the machine to automatically cap the print head, thus preventing it from drying.

• After packing, do not tilt the box containing the machine or turn it on its side or upside down. Doing so

may cause the ink to leak during transport and cause damage to the machine.

• When a shipping agent is handling transport of the machine, have its box marked "THIS SIDE UP" to

keep the machine with its bottom facing down. Mark also with "FRAGILE" or "HANDLE WITH CARE".

1. Turn the machine off.

2. Confirm that the

lamp is off and

unplugging the power cord

Important

• Do not unplug the machine while the

lamp is lit or flashing, as it may cause malfunction or

damage to the machine, making the machine unable to print.

3. Retract the paper output tray and the output tray extension, then close the paper support.

4. Unplug the printer cable from the computer and from the machine, then unplug the power

cord from the machine.

5. Use adhesive tape to secure all the covers on the machine to keep them from opening

during transportation. Then pack the machine in the plastic bag.

6. Attach the protective material to the machine when packing the machine in the box.

262

Summary of Contents for MG2900 Series
































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MG2900 Series

Reviews:

Brands by name

Popular brands

Canon MG2900 Series, Online Manual

Search results

Summary of Contents for MG2900 Series

Reviews:

Brands by name

Popular brands