Home
/
Canon
/
MG2900 Series
/
Online Manual

Canon MG2900 Series, Online Manual, Page: 168 / 735

Share

Page: 168 / 735

Canon MG2900 Series Online Manual Download Page 168

Reducing the Printer Noise

The silent function allows you to reduce the operating noise of this printer. Select when you wish to reduce
the operating noise of the printer at night, etc.
Using this function may lower the print speed.

The procedure for using the quiet mode is as follows:

Quiet Settings

printer driver setup window

2. Click

Quiet Settings

on the

Maintenance

tab

The

Quiet Settings

dialog box opens.

Note

• If the printer is off or if communication between the printer and the computer is disabled, an

error message may appear because the computer cannot collect the printer status.

3. Set the quiet mode

If necessary, specify one of the following items:

Do not use quiet mode

Select this option when you wish to use the printer with volume of normal operating noise.

Always use quiet mode

Select this option when you wish to reduce the operating noise of the printer.

Use quiet mode during specified hours

Select this option when you wish to reduce the operating noise of the printer during a specified
period of time.
Set the

Start time

and the

End time

of the quiet mode you wish to be activated. If both are set to

the same time, the quiet mode will not function.

Important

• You can set the quiet mode from the printer, the printer driver, or ScanGear (scanner driver).

No matter how you use to set the quiet mode, the mode is applied when you perform
operations from the printer or printing and scanning from the computer.

• If you specify a time for

Use quiet mode during specified hours

, quiet mode is not applied

to operations (copy, direct print, etc.) performed directly from the printer.

4. Apply the settings

Make sure that the printer is on and click

OK

.

Click

OK

when the confirmation message appears.

The settings are enabled hereafter.

168

«
...
166
167
168
169
170
...
»

Summary of Contents for MG2900 Series
































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments