manualshive.com logo in svg

Canon MG2900 Series, Online Manual

Share
Download
Canon MG2900 Series Online Manual Download Page 120

Loading Originals on the Platen Glass

1. Load an original on the platen glass.

1. Open the document cover.

Important

• Do not place any object on the document cover. It will fall into the rear tray when the document cover

is opened and cause the machine to malfunction.

2. Load the original WITH THE SIDE TO SCAN FACING DOWN on the platen glass.

Originals You Can Load

Align the corner of the original with the alignment mark 

.

Important

• Be sure to observe the following when loading the original on the platen glass.

• Do not place any objects weighing 4.4 lb (2.0 kg) or more on the platen glass.
• Do not put any pressure of 4.4 lb (2.0 kg) or more on the platen glass, such as pressing down

the original.

Failure to observe the above may cause the scanner to malfunction or the platen glass to break.

• The machine cannot scan the striped area (A) (0.04 inch (1 mm) from the edges of the platen

glass).

2. Close the document cover gently.

120

Summary of Contents for MG2900 Series
































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands