Canon MG2900 Series, Manual

Page: 29 / 531

Connection without Using an Access Point (Windows XP)
Restrictions
(Appears in a new window)
1. Hold down the Wi-Fi button (A) on the printer until the Alarm lamp (B) flashes 3 times,
then release the Wi-Fi button after the third flash.
The printer's access point mode will be enabled.
2. Check the SSID and network key of your printer.
The default SSID is the printer name. Print the LAN setting information and check the SSID field.
• How to print the LAN setting information
Hold down the Stop button on the printer until the Alarm lamp flashes 15 times, then release the
Stop button after the fifteenth flash.
The LAN setting information will be printed.
The default network key is the serial number of the printer. Check the rear side of the printer or
warranty.
3. Right-click the Wireless Network Connection icon in the notification area of the taskbar
on the computer, then select View Available Wireless Networks .
4. Select the network name (SSID) you want to use, then click Connect .
29