Canon MF729Cx, Important Safety Instructions And Installation Manual

Page: 144 / 782

Setting Up the Machine to Receive Faxes
Press and tap <Fax>.
When the logon screen appears, use the numeric keys to enter the user name and password. Then select the authentication
server and press
. Logging on to Authorized Send
Tap <RX Mode>.
Select the receiving method.
When selecting <Fax/Tel (Auto Switch)>
If you want to print received documents on both sides of paper: Print on Both Sides
If you want to print information, such as reception date and time, at the bottom of received documents: RX Page Footer
If you want to continue printing even when the toner cartridge is low: Continue Printing When Amount in Cartridge Is
Low
Specify the following three settings as necessary. When the setting is complete, tap <Apply>.
<Ring Start Time>
Enables you to specify the duration during which the machine determines whether an incoming call is a fax or a
telephone call. (Setting values: 5 to 30 seconds; default setting: 8 seconds)
<Incoming Ring Time>
Enables you to specify the duration during which an incoming call rings for a telephone call. (Setting values: 15 to 300
seconds; default setting: 22 seconds)
<After Ring>
Enables you to specify how the machine operates if you do not pick up the handset while an incoming call is ringing.
Select <End> to disconnect the call or <Receive> to receive an incoming fax. (Default setting: <Receive>)
1
2
3
㻝㻠㻠㻌㻛㻌㻣㻟㻡