Canon MF512 Series, User Manual, Page: 660 / 913

Functions
Select the function for which you want to configure automatic drawer selection.
● Select <Other> for functions such as printing reports and lists and printing images from a USB memory
device.
Paper Sources
Select the paper source for which you want to enable.
● <Multi-Purpose Tray> is not displayed if <Printer> was selected on the previous screen ( ). Automatic
drawer selection is always enabled for printing on paper fed from the multi-purpose tray.
Switch of the settings
Select <On> to enable automatic drawer selection for the paper source you selected on the previous screen
( ).
● Make sure to select <On> for <Drawer 1>, <Drawer 2> or <Drawer 3>. If <Off> is selected for all drawers, you
cannot finish the configuration.
Switch Paper Feed Method
Specify this setting when you print a document on paper with logos. To print on paper with logos, you need to change
how the paper loaded in the paper source is facing depending on whether you are performing 1- or 2-sided printing.
However, if you specify <Print Side Priority>, you can use just the same way of paper loading (which side up or down)
both for 1- and 2-sided printing (namely, the side with logos face up when using the paper drawer, or the side with
logos face down when using the multi-purpose tray). For more information, see Loading Preprinted Paper(P. 62) .
Multi-Purpose Tray
Speed Priority
Print Side Priority
Drawer 1
Speed Priority
Print Side Priority
Drawer 2
*
Speed Priority
Print Side Priority
Drawer 3
*
Speed Priority
Print Side Priority
Setting Menu List
651