manualshive.com logo in svg

Canon MF512 Series, User Manual, Page: 489 / 913

Share
Download
Canon MF512 Series User Manual Download Page 489

Configuring the Machine for Scanning to FTP Server

0Y9U-082

Before configuring the machine for scanning to FTP Server, check the setup flow shown below.

 

 

Make sure that the machine and the computer are correctly connected.

Connecting to a Wireless LAN(P. 418)
Connecting to a Wired LAN(P. 417)

 

 

Make sure that you have the following information:

●

The IP address of the machine.  Viewing Network Settings(P. 445)

●

FTP server name.

●

Path to the FTP server and folder name.

●

User name, password (only if set).

●

If the path, folder name, user name, password, etc. for the FTP server are
unknown,contact you Network Administrator.

●

To change the FTP port number  Changing Port Numbers(P. 549)
 

 

Check whether you need to use PASV mode.

●

If a firewall is installed between the machine and the FTP server, you must set
PASV mode.  Configuring FTP PASV mode(P. 481)

●

Also make sure that <Use HTTP> and <Use Remote UI> are set to <On>.

Disabling HTTP Communication(P. 567)
Disabling Remote UI(P. 568)

 

 

Register the FTP server address. 

Registering Destinations in the Address

Book from Remote UI(P. 624)

Network

480

Summary of Contents for MF512 Series


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments