manualshive.com logo in svg

Canon MF512 Series, User Manual, Page: 170 / 913

Share
Download
Canon MF512 Series User Manual Download Page 170

Specifying Destinations in an LDAP Server

0Y9U-02S

  If your office has an LDAP server installed, you can specify a destination using user

information in the server. Access the LDAP server via the machine to search for the
appropriate user information and specify it as destination.

●

You need to specify the settings for connecting to an LDAP server beforehand.  Registering LDAP
Servers(P. 499)

1

Press   and tap <Fax>.

●

When the logon screen appears, use the numeric keys to enter the user name and password. Then select the
authentication server and press 

.   Logging on to Authorized Send(P. 44)

2

Select <Destination>   <Specify from LDAP Server>.

3

Select the LDAP server you are using.

4

Select the search criteria.

●

Name, fax numbers, e-mail addresses, organization names, and organization unit are available criteria for
searching destinations.

Faxing

161

Summary of Contents for MF512 Series


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments