Canon MF4500 Series, Service Manual

Page: 127 / 255

4
4
4-64
4-64
Disassembly/Assembly > Document Exposure/Feeder System > Removing the Copyboard Cover and Reader Unit
Disassembly/Assembly > Document Exposure/Feeder System > Removing the Copyboard Cover and Reader Unit
Removing the Copyboard Cover
1) Remove the copyboard cover [1].
[1]
F-4-137
Before Removing the Copyboard Cover and Reader
Unit
1-1) Remove the left cover. (Duplex models) (Refer to page 4-31)
1-2) Remove the left cover. (Single-sided models) (Refer to page 4-32)
Removing the Copyboard Cover and Reader Unit
1) Remove the grounding wire [1].
• 1 screw (black TP) [2]
2) Remove the connector [3] and 2 flat cables [4].
• 2 ferrite cores (small) [5]
• 1 ferrite core (large) [6]
3) Disengage the disconnected grounding wire [1], harness [3] and 2 flat cables [4] from the
harness guide [A].
[A]
[1]
[3]
[2]
[4]
x3
[3]
[1]
[5]
[4]
[6]
F-4-138