Canon MF419x, User Manual, Page: 656 / 917

UTC
● Coordinated Universal Time (UTC) is the primary time standard by which the world regulates clocks
and time. The correct UTC time zone setting is required for Internet communications.
Daylight Saving Time Settings
*1
Enable or disable daylight saving time. If daylight saving time is enabled, specify the dates from which and to
which daylight saving time is in effect.
Off
On
Start: Month, Week, Day
End: Month, Week, Day
<Menu> <Timer Settings> <Date/Time Settings> <Daylight Saving Time Settings> Select a
month and day <Apply>
Auto Reset Time
If a key is not pressed for a specified period of time, the screen and the settings are initialized to display the
default screen (Auto Reset). Specify the interval at which the Auto Reset is performed. Select <0> to disable the
Auto Reset function. The Auto Reset is not performed in the following cases:
● The setting menu is displayed.
● The machine is processing data, such as when printing documents or sending or receiving faxes.
● An error message is displayed and the Error indicator is blinking (However, Auto Reset is performed when the
error does not prevent the user from continuing to use a function.)
0 (Auto Reset is disabled.)
1 to 2 to 9 (min.)
<Menu> <Timer Settings> <Auto Reset Time> Set the Auto Reset time <Apply>
● The screen displayed after the Auto Reset is performed can be selected in <Function After Auto Reset>.
Function After Auto Reset
Select whether to return the display to the default screen after the Auto Reset is performed. If <Default Function> is
selected, the main screen of the function selected in <Default Screen after Startup/Restoration> is displayed (
Setting Menu List
647