manualshive.com logo in svg

Canon MF419x, User Manual, Page: 269 / 917

Share
Download
Canon MF419x User Manual Download Page 269

Printing Dates and Page Numbers

0UWX-04J

  You can print the information such as dates or page numbers, and you can specify

where to print this information on the document (upper-left, lower-right, etc.).

[Page Setup] tab   Click [Page Options]   Select the print position of the print date, user name or
page number   [OK]   [OK]

[Print Date]

Specify the position to print the print date.

[Print User Name]

Specify the position to print the user name (logon name) for the computer used to print the document.

[Print Page Number]

Specify the position to print the page number.

Changing the Print Format of Dates and Page Numbers

●

You can change formatting details such as font and font size when printing dates, logon names, or page
numbers. Click [Format Settings] on the Page Options screen shown above to specify the details.

Using the Machine as a Printer

260

Summary of Contents for MF419x






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments