manualshive.com logo in svg

Canon MF419x, User Manual, Page: 259 / 917

Share
Download
Canon MF419x User Manual Download Page 259

Switching 1-Sided and 2-Sided Printing

0UWX-049

  You can make both 1-sided and 2-sided printouts. The default setting is [2-sided

Printing]. Change the setting as necessary.

Make sure that the paper size switch lever is set properly

●

When performing 2-sided printing, improper setting of the paper size switch lever can cause misfeeds or
paper jams. When performing 2-sided printing, make sure that the paper size switch lever is set properly for
the size of the paper to be used.  Interior(P. 22)

Make sure that the sub-output tray is closed

●

When the sub-output tray is open, you cannot perform 2-sided printing. When performing 2-sided printing,
always make sure that the sub-output tray is closed.  Back Side(P. 20)

●

2-sided printing may not be available with some sizes and types of paper.  Paper(P. 858)

[Basic Settings] tab   Select [1-sided Printing] or [2-sided Printing] in [1-sided/2-sided/Booklet
Printing]   Select the position to bind in [Binding Location]   [OK]

Using the Machine as a Printer

250

Summary of Contents for MF419x






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments