Canon MF419x User Manual Download Page 240

Page: 240 / 917

Receiving I-Faxes

0UWX-041

◼

When an I-Fax Arrives

When an I-Fax arrives, the Processing/Data indicator on the operation panel blinks. After the I-Fax is completely

received, the document is printed out automatically and the indicator goes out.

●

To cancel reception, press

<RX Job> <Job Status> Select the document on the <RX Job Status>

screen <Delete> <Yes>

◼

Receiving I-Faxes Manually

If you want to connect to the server before receiving I-Faxes automatically, or if you want to configure the machine so

that it does not receive I-Faxes automatically, use the method below to receive I-Faxes manually.

➠

Connect to the server. If there is a document on the server, printing begins.

◼

Printout Paper

Regardless of the received document size, incoming I-Faxes are printed at the size specified in <RX Print Size>. RX

Print Size(P. 670)

●

If paper of the size specified in <RX Print Size> is not loaded in the paper drawer, the <No Paper> error
message is displayed. When an Error Message Appears(P. 734)

●

If you want to print received documents on both sides of paper: Print on Both Sides(P. 670)

●

If you want to continue printing even when toner is running low: Continue Printing When Amount in
Cartridge Is Low(P. 664)

Faxing

231

Summary of Contents for MF419x






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MF419x

Reviews:

Canon MF419x, User Manual, Page: 240 / 917

Search results

Summary of Contents for MF419x

Reviews: