Canon MF3110 - ImageCLASS Laser Multifunction Software Manual Download

Page: 142 / 166

Driver Problems

4-4

roub

ooti

Driver Problems

Driver is not working properly.

Is the printer driver selected as the default printer driver?

Specify the corresponding printer driver as the default printer driver for the
MF3110.

Cannot print some fonts in a document correctly.

Does the document contain Adobe Type Manager (ATM) fonts?

Adobe Type Manager (ATM) is not supported. Replace Adobe Type Manager
(ATM) fonts to other appropriate fonts.

Cannot print with a printer driver other than the MF3110 printer.

Is the printer driver connected to the same port as the MF3110 printer driver?

Connect the printer driver to a port different from the MF3110 printer driver.

Cannot install the MF3110 printer driver using the USB port.

Is the USB driver installed properly?

Perform the following steps.

Make sure the machine is connected to your computer using a USB cable
and the machine is turned on.

For Windows XP, click [Performance and Maintenance] in the [Control Panel]
folder

➞

[See basic information about your computer] in the [Performance

and Maintenance] folder. For Windows 98/Me/2000, double-click [System] in
the [Control Panel] folder. The [System Properties] dialog box appears.

For Windows 2000/XP, select the [Hardware] tab

➞

click [Device Manager]

➞

double-click [Universal Serial Bus controllers]. For Windows 98/Me, select
the [Device Manager] tab

➞

double-click [Universal Serial Bus controllers].

Summary of Contents for MF3110 - ImageCLASS Laser Multifunction







































































































































































Search results

Summary of Contents for MF3110 - ImageCLASS Laser Multifunction

Reviews:

Related manuals for MF3110 - ImageCLASS Laser Multifunction

Brands by name

Popular brands

Canon MF3110 - ImageCLASS Laser Multifunction, Software Manual

Search results

Summary of Contents for MF3110 - ImageCLASS Laser Multifunction

Reviews:

Related manuals for MF3110 - ImageCLASS Laser Multifunction

Brands by name

Popular brands