manualshive.com logo in svg

Canon MB2300 series, Online Manual, Page: 950 / 1155

Share
Download
Canon MB2300 series Online Manual Download Page 950

Cannot Print Properly with Automatic Duplex Printing

Check1

 Is the setting for automatic duplex printing selected?

Make sure that the 

Duplex Printing

 and 

Automatic

 check boxes are selected on the 

Page Setup

 sheet in the

printer driver setup window.

Duplex Printing

Check2

 Make sure that the actual size of the paper is suitable for automatic duplex

printing.

The sizes of media suitable for automatic duplex printing are A4 and Letter.

Load paper of suitable size, then tap 

OK

 on the touch screen.

Check3

 Make sure that the paper size setting is correct.

Make sure that the paper size setting matches the actual size of the paper with a size suitable for automatic
duplex printing.

First, check the paper size setting in the application software you are printing from.

Then, check the 

Page Size

 setting on the 

Page Setup

 sheet in the printer driver setup window.

Note

• Duplex printing may not be available depending on the version of the application software.

Check4

 Make sure that the media type setting is correct.

Make sure that the media type setting matches the actual size of the paper with a size suitable for automatic
duplex printing.

Make sure that the type of loaded paper is suitable for automatic duplex printing on the 

Main

 sheet in the printer

driver setup window.

Note

• To switch to manual duplex printing, follow the procedure below.

Open the printer driver setup window, clear the 

Automatic

 check box on the 

Page Setup

 sheet, and

reprint.

When performing manual duplex printing, note the following.

• If you are printing three or more pages of a document with manual duplex printing, one side of all

sheets of paper will be printed first. Turn over the paper and reload the paper in the machine, and
then the reverse side of all sheets of paper will be printed. Be careful not to change the order of
paper in the stack.

• The procedure for reversing the paper varies depending on the staple side and printing orientation.

Follow the on-screen instructions.

950

Summary of Contents for MB2300 series




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments