Home
/
Canon
/
MB2100 Series
/
Online Manual

Canon MB2100 Series, Online Manual, Page: 552 / 1313

Share

Page: 552 / 1313

Canon MB2100 Series Online Manual Download Page 552

This mode comes in handy when the operating noise of the printer becomes a concern, such when
printing at night. Perform this operation when you want to change the quiet mode setting.

Note

• If the printer is off or if communication between the printer and the computer is disabled, an error

message may appear because the computer cannot collect the printer status.

Custom Settings

Custom Settings

Perform this function to change the settings of this printer.

Note

• If the printer is off or if communication between the printer and the computer is disabled, an error

message may appear because the computer cannot collect the printer status.
If this happens, click

OK

to display the most recent settings specified on your computer.

View Print History

This function starts the Canon IJ XPS preview, and displays the print history.

Note

• You can use this function only with the XPS printer driver.

View Printer Status

Starts the Canon IJ Status Monitor.
Perform this function when you want to check the printer status and how a print job is proceeding.

Note

• If you are using the XPS printer driver, the "Canon IJ Status Monitor" becomes the "Canon IJ XPS

Status Monitor".

About

The version of the printer driver, plus a copyright notice, can be checked.
In addition, the language to be used can be switched.

Initial Check Items (Cleaning / Deep Cleaning)

Before running

Cleaning

or

Deep Cleaning

, check that the printer power is on, and open the cover of the

printer.
Check the following items for each ink.

•

Check the amount of ink

remaining in the tank.

• Make sure that you push in the ink tank completely until you hear a clicking sound.
• If an orange tape is adhered to the ink tank, peel it off completely.

Any remaining tape will hinder ink output.

• Check that the ink tanks are installed in their correct positions.

552

«
...
550
551
552
553
554
...
»

Summary of Contents for MB2100 Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments