Home
/
Canon
/
MB2100 Series
/
Online Manual

Canon MB2100 Series, Online Manual, Page: 1129 / 1313

Share

Page: 1129 / 1313

Canon MB2100 Series Online Manual Download Page 1129

Cannot Send a Fax

Check1

Is power turned on?

• You cannot send faxes if the power is turned off. Press the

ON

button to turn the power on.

• If you unplugged the power cord without turning off the power (the

POWER

lamp is lit), reconnecting it turns

on the power automatically.

• If you unplugged the power cord after pressing the

ON

button to turn off the power (the

POWER

lamp is

off), reconnect it, and then press the

ON

button to turn on the power.

• If the power was turned off due to power failure, etc., the power is automatically turned on when the power

failure is resolved.

Important

• Confirm that the

POWER

lamp is off before unplugging the power cord, and then unplug the power cord.

If a power failure occurs or you unplug the power cord, all faxes stored in the printer's memory are deleted.

For details on how to unplug the power cord, refer to

Unplugging the Machine

.

Note

• If the faxes stored in the printer's memory are deleted by a power failure or unplugging the power cord, the

list of the faxes deleted from the printer's memory (MEMORY CLEAR REPORT) will be printed after turning
the printer on.

For details, see

Summary of Reports and Lists

.

Check2

Is document being sent from memory or the fax being received into memory?

When the message for the transmission/reception is displayed on the Fax standby screen, a fax is being sent
from/received into printer's memory. Wait until the transmission/reception is complete.

Check3

Is printer's memory full?

Delete contents in memory, and then send a fax again.

Document Stored in Printer's Memory

Check4

Is telephone line type set correctly?

Check the telephone line type setting and change it as necessary.

Setting Telephone Line Type

Check5

Is

Hook key setting

set to

Disable

?

When you send a fax manually, dial the number with

Enable

selected for

Hook key setting

in

Security control

under

FAX settings

, or dial the number using the telephone connected to the printer.

1129

«
...
1127
1128
1129
1130
1131
...
»

Summary of Contents for MB2100 Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments