Canon MAXIFY MB5110, Online Manual, Page: 563 / 1356

Do not use quiet mode
Select this option when you wish to use the printer with volume of normal operating noise.
Always use quiet mode
Select this option when you wish to reduce the operating noise of the printer.
Use quiet mode during specified hours
Select this option when you wish to reduce the operating noise of the printer during a specified period
of time.
Set the
Start time and the End time of the quiet mode you wish to be activated. If both are set to the
same time, the quiet mode will not function.
Important
• You can set the quiet mode from the operation panel of the printer, the printer driver, or ScanGear
(scanner driver).
No matter how you use to set the quiet mode, the mode is applied when you perform operations from
the operation panel of the printer or printing and scanning from the computer.
Custom Settings dialog box
When you click Custom Settings , the Custom Settings dialog box is displayed.
If necessary, switch between various modes of printer operation.
Prevent paper abrasion
The printer can increase the gap between the print head and the paper during high-density printing to
prevent paper abrasion.
Check this check box to enable this function.
Align heads manually
Usually, the Print Head Alignment function on the Maintenance tab is set to automatic head
alignment, but you can change it to manual head alignment.
If the printing results of automatic print head alignment are not satisfactory,
perform manual head
alignment .
Check this check box to perform the manual head alignment.
Rotate 90 degrees left when orientation is [Landscape]
On the Page Setup tab, you can change the rotation direction of the Landscape in the Orientation .
To rotate the document 90 degrees to the left when printing, select the check box.
Note
• If Yougata 4 4.13"x9.25" , Yougata 6 3.86"x7.48" , Envelope Com 10 , Envelope DL , Envelope
C5 , or Envelope Monarch 3.88"x7.5" 98.4x190.5mm is selected for Page Size on the Page
Setup tab, the printer rotates the paper 90 degrees to the left to print, regardless of the Rotate
90 degrees left when orientation is [Landscape] setting for Custom Settings on the
Maintenance tab.
Don't detect mismatch of paper settings when printing from computer
When you print documents from your computer and the paper settings on the printer driver and the
cassette paper information registered on the printer do not match, this setting disables the message
display and allows you to continue printing.
To disable detection of paper setting mismatches, select this check box.
563