Canon MAXIFY MB2750, Online Manual

Page: 320 / 1366

Reset setting
Select this setting item from Device settings on Setup .
Returns all settings you made to the printer back to the default. However, some data may not be changed,
depending on the current usage state of your printer.
Important
• The administrator password is required to change settings if it is enabled for changing settings using
the operation panel.
• Depending on the setting item, it is necessary to perform connection or setup again after you have
returned the setting back to the default.
• Web service setup only
Deletes IJ Cloud Printing Center and Google Cloud Print registrations.
• LAN settings only
Sets the LAN settings other than the administrator password back to the default.
After resetting, perform setup again as necessary.
• Telephone number only
Deletes all registered telephone/fax numbers.
• Settings only
Returns the settings such as the paper size, media type, or other setting items back to the default. The
LAN settings and the telephone/fax number are not returned back to the default.
• Device info sending setting only
Applies the setting not to send the device information to Canon.
• E-mail address book entries only
Deletes all registered e-mail addresses.
• FAX settings only
Returns all fax settings back to the default. Disconnect the telephone line from the printer before you
return this setting item back to the default.
After resetting, perform setup again as necessary.
• Reset all
Sets all settings you made to the printer back to the default. The administrator password specified for
the printer is set to the default setting.
After resetting, perform setup again as necessary.
Note
• You cannot set the following setting items back to the default:
• The language displayed on the touch screen
• The current position of the print head
320