Canon MAXIFY MB2710, Online Manual, Page: 1024 / 1366

cord before automatic redialing is complete, all faxes stored in the printer's memory
are deleted and not sent.
Resend the document.
Errors When You Receive Fax
If an error occurs when you receive a fax, the error number is printed on RX REPORT or ACTIVITY
REPORT (there are some errors for which the cause is also printed).
The causes corresponding to the error numbers are as follows.
No. Cause Action
#003 It takes too long to re-
ceive a page.
Contact the sender and have the sender divide the fax or set the image quality (Fax
resolution) to a lower setting and resend it.
#005 No answer. When receiving a fax manually, the printer could not detect the signals from the
sender's fax device.
Contact the sender and have the sender resend it, or set the printer to receive the
fax automatically.
#037 Memory is full. The printer could not receive a fax because its memory is full.
Delete contents in memory, and then ask the sender to resend the fax. See Docu-
ment Stored in Printer's Memory .
#046 Reception has been re-
jected due to the speci-
fied fax rejection condi-
tion.
Reception has been rejected because the fax matches the fax rejection condition
specified by
FAX reception reject in Security control under FAX settings .
For details, see Rejecting Fax Reception .
#099 The Stop button was
pressed during recep-
tion.
The Stop button was pressed to cancel reception of the fax. Contact the sender and
have the sender resend it if necessary.
#995 The received fax was
deleted.
The received fax was deleted before being saved to the USB flash drive, forwarded
to the shared folder on the computer, or printed. Contact the sender and have the
sender resend it if necessary.
1024