Canon MAXIFY iB4060 Online Manual Download Page 450

Page: 450 / 504

5103

Cause

Printer error has occurred.

Action

Cancel printing and turn off the printer.

Then confirm the following.

• Confirm that there are no materials (e.g. the protective material or jammed paper) that is preventing

the print head holder from moving.

If any, remove the materials.

• Confirm that the ink tanks are installed properly.

Push an ink tank until it clicks into place.

After confirming the conditions above, turn on the printer again.

If the problem is not resolved, contact the service center.

Important

• When you clear the jammed paper or protective material that is preventing the print head holder from

moving, be careful not to touch the clear film (A) or the white belt (B).

If the paper or your hands touch these parts and blot or scratch them, the printer can be damaged.

450

Summary of Contents for MAXIFY iB4060

























































































































































































































































































































































































































































































































Search results

Summary of Contents for MAXIFY iB4060

Reviews:

Canon MAXIFY iB4060, Online Manual, Page: 450 / 504

Search results

Summary of Contents for MAXIFY iB4060

Reviews: