Canon MAXIFY iB4060 Online Manual Download Page 417

Page: 417 / 504

1314

Cause

Paper is jammed inside the rear cover when performing automatic duplex printing.

Action

If the paper is jammed inside the rear cover when performing automatic duplex printing, remove the paper
following the procedure below.

Note

• If you need to turn off the printer to remove jammed paper during printing, press the

Stop

button to

cancel print jobs before turning off the printer.

1. Rotate the printer so that the rear side of the printer faces toward you.

2. If the protective material for the rear cover remains attached, remove it.

3. Open the rear cover.

Slide the rear cover to the left then open it.

4. Pull out the paper slowly.

417

Summary of Contents for MAXIFY iB4060

























































































































































































































































































































































































































































































































Search results

Summary of Contents for MAXIFY iB4060

Reviews:

Canon MAXIFY iB4060, Online Manual, Page: 417 / 504

Search results

Summary of Contents for MAXIFY iB4060

Reviews: