Canon MAXIFY iB4060 Online Manual Download Page 380

Page: 380 / 504

Lines Are Misaligned

Check1

Did you confirm the paper and print quality settings?

Print Results Not Satisfactory

Check2

Perform Print Head Alignment.

If printed lines are misaligned or print results are otherwise unsatisfactory, adjust the print head position.

Aligning the Print Head

Note

• If the problem is not resolved after performing the Print Head Alignment, perform Print Head Alignment

manually referring to

Aligning the Print Head Position Manually from Your Computer

Check3

Increase the print quality and try printing again.

Increasing the print quality in the printer driver may improve the print result.

380

Summary of Contents for MAXIFY iB4060

























































































































































































































































































































































































































































































































Search results

Summary of Contents for MAXIFY iB4060

Reviews:

Canon MAXIFY iB4060, Online Manual, Page: 380 / 504

Search results

Summary of Contents for MAXIFY iB4060

Reviews: