Canon MAXIFY iB4060 Online Manual Download Page 365

Page: 365 / 504

Click

Ethernet

, then see

Ethernet ID

to confirm the MAC address.

Checking If the Computer and the Printer, or Computer and the

Access Point Can Communicate

To check that communication is available, perform the ping test.

1. Open the

Utilities

folder in the

Applications

folder.

2. Start

Network Utility

3. Click the

Ping

button.

4. Make sure that

Send only XX pings

(XX are numbers) is selected.

5. Enter the IP address of the target printer or the target access point in

Enter the network

address to ping.

6. Click

Ping

"XXX.XXX.XXX.XXX" is the IP address of the target device.

A message such as the following is displayed.

64 bytes from XXX.XXX.XXX.XXX: icmp_seq=0 ttl=64 time=3.394 ms

64 bytes from XXX.XXX.XXX.XXX: icmp_seq=1 ttl=64 time=1.786 ms

64 bytes from XXX.XXX.XXX.XXX: icmp_seq=2 ttl=64 time=1.739 ms

--- XXX.XXX.XXX.XXX ping statistics ---

3 packets transmitted, 3 packets received, 0% packet loss

If the packet loss is 100%, the communication is not available. Otherwise, the computer is
communicating with the target device.

Checking the Network Setting Information

To check the network setting information of the printer, print out the network setting information using the
operation panel of the printer.

Printing Out Network Setting Information

365

Summary of Contents for MAXIFY iB4060

























































































































































































































































































































































































































































































































Search results

Summary of Contents for MAXIFY iB4060

Reviews:

Canon MAXIFY iB4060, Online Manual, Page: 365 / 504

Search results

Summary of Contents for MAXIFY iB4060

Reviews: