Canon MAXIFY iB4060 Online Manual Download Page 320

Page: 320 / 504

Margin

This dialog allows you to set the stapling side and amount of margin for stapling multiple sheets of paper.

Margin

Specify the amount of margin space for stapling the paper. Enter a value between 0 inches (0 mm) to
1.2 inches (30 mm).

Stapling Side

Specify the stapling side.

Long-side stapling (Left) / Long-side stapling (Right)

Select this option to staple the long side of the paper.
Choose left or right.

Short-side stapling (Top) / Short-side stapling (Bottom)

Select this option to staple the short side of the paper.
Choose top or bottom.

320

Summary of Contents for MAXIFY iB4060

























































































































































































































































































































































































































































































































Search results

Summary of Contents for MAXIFY iB4060

Reviews:

Canon MAXIFY iB4060, Online Manual, Page: 320 / 504

Search results

Summary of Contents for MAXIFY iB4060

Reviews: