Canon MAXIFY iB4060 Online Manual Download Page 283

Page: 283 / 504

Page Layout Printing

The page layout printing function allows you to print more than one page image on a single sheet of paper.

The procedure for performing page layout printing is as follows:

1. Select

Layout

from the pop-up menu in the

Print Dialog

2. Set the number of original you print on one page

Pages per Sheet

, specify the number of page you print on one page.

3. If necessary, set the following items

Layout Direction

To change the page placement order, select an icon from the list.

Border

To print a page border around each document page, select a type of page border.

Reverse page orientation

Select this check box to change the paper orientation.

Flip horizontally

Select this check box to reverse left and right of the document.

283

Summary of Contents for MAXIFY iB4060

























































































































































































































































































































































































































































































































Search results

Summary of Contents for MAXIFY iB4060

Reviews:

Canon MAXIFY iB4060, Online Manual, Page: 283 / 504

Search results

Summary of Contents for MAXIFY iB4060

Reviews: