Canon MAXIFY iB4060 Online Manual Download Page 269

Page: 269 / 504

Printing with Easy Setup

The simple setup procedure for carrying out appropriate printing on this printer is as follows:

Check that the printer is turned on

Load paper

on the printer

3. Select the printer

Select your model from the

Printer

list in the

Print Dialog

Note

• Click

Show Details

( (the disclosure triangle)) to switch the Setup window to the detailed

display.

4. Select the paper size

For

Paper Size

, select the paper size to be used.

If necessary, set the number of copies, the pages to be printed, and the orientation.

269

Summary of Contents for MAXIFY iB4060

























































































































































































































































































































































































































































































































Search results

Summary of Contents for MAXIFY iB4060

Reviews:

Canon MAXIFY iB4060, Online Manual, Page: 269 / 504

Search results

Summary of Contents for MAXIFY iB4060

Reviews: