Canon MAXIFY iB4060 Online Manual Download Page 222

Page: 222 / 504

Canon IJ Network Tool Screen

This section describes the items displayed on the

Canon IJ Network Tool

screen.

Utilities

Modifies the settings of the machine.

Select to change the network name (SSID) settings.

Setup

Sets up the machine.

If you setup the machine from scratch, connect your computer and the machine with a USB cable.

Printers:

Printer name, type, and connection destination are displayed.

The selected printer can be set up or be modified.

Update

Performs printer detection again. Click this button if the target printer is not displayed.

Important

• To change the printer's network settings using IJ Network Tool, it must be connected via a LAN.

• If the printer on a network is not detected, make sure that the printer is turned on, then click

Update

. It may take several minutes to detect printers. If the printer is not yet detected, connect

the machine and the computer with a USB cable, then click

Update

• If the printer is being used from another computer, a screen is displayed informing you of this

condition.

Note

• This item has the same function as

Refresh

in the

View

menu.

222

Summary of Contents for MAXIFY iB4060

























































































































































































































































































































































































































































































































Search results

Summary of Contents for MAXIFY iB4060

Reviews:

Canon MAXIFY iB4060, Online Manual, Page: 222 / 504

Search results

Summary of Contents for MAXIFY iB4060

Reviews: