Canon MAXIFY iB4060 Online Manual Download Page 205

Page: 205 / 504

About Quiet setting

Enables this function on the printer if you want to reduce the operating noise, such as when printing at night.

Follow the procedure below to perform setting.

Make sure that the printer is turned on.

2. Press the

Setup

button.

The

Setup menu

screen is displayed.

3. Use the

button to select

Quiet setting

, then press the

button.

4. Use the

button to select

, then press the

button.

The LCD returns to the

Setup menu

screen.

You can reduce the operating noise while printing is in progress.

Important

• Operating speed may be reduced compared to when

OFF

is selected.

• This function may not be so effective depending on the printer's setting. Furthermore, certain

noise, such as when the printer is preparing for printing, is not reduced.

Note

• You can set the quiet mode from the operation panel of the printer or the printer driver. No matter

how you set the quiet mode, the mode is applied when you perform operations from the operation
panel of the printer or printing from the computer.

205

Summary of Contents for MAXIFY iB4060

























































































































































































































































































































































































































































































































Search results

Summary of Contents for MAXIFY iB4060

Reviews:

Canon MAXIFY iB4060, Online Manual, Page: 205 / 504

Search results

Summary of Contents for MAXIFY iB4060

Reviews: