Canon MAXIFY iB4060 Online Manual Download Page 196

Page: 196 / 504

Changing the Printer Settings on the LCD

This section describes the procedure to change the settings in the

Device settings

screen, taking the steps

to specify

Prevent abrasion

as an example.

Note

• The * (asterisk) on the LCD indicates the current setting.

Make sure that the printer is turned on.

2. Press the

Setup

button.

The

Setup menu

screen is displayed.

3. Use the

button to select

Device settings

, then press the

button.

The

Device settings

screen is displayed.

4. Use the

button to select the setting item, then press the

button.

The setting screen for the selected item is displayed.

5. Use the

button to select the menu, then press the

button.

6. Use the

button to select a setting item, then press the

button.

You can select the setting menus below.

Note

• You can use the printer considering the environment, such as enabling the printer to turn on/off

automatically.

Turning on/off the Printer Automatically

• You can reduce the operating noise when printing at night.

196

Summary of Contents for MAXIFY iB4060

























































































































































































































































































































































































































































































































Search results

Summary of Contents for MAXIFY iB4060

Reviews:

Canon MAXIFY iB4060, Online Manual, Page: 196 / 504

Search results

Summary of Contents for MAXIFY iB4060

Reviews: