Canon MAXIFY iB4060 Online Manual Download Page 161

Page: 161 / 504

Printing the Nozzle Check Pattern

Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle.

Note

• When the ink has run out during printing the nozzle check pattern, the error message will appear on the

LCD.

A Message Is Displayed

You need to prepare: a sheet of A4 or Letter-sized plain paper

1. Make sure that the power is turned on.

2. Load a sheet of A4 or Letter-sized plain paper in the cassette 1.

After inserting the cassette into the printer, the paper information registration screen is displayed on the
LCD. Select

Letter

for

Size:

and

Plain paper

for

Type:

, then press the

button.

Important

• The cassette 2 is not available for the nozzle check pattern print procedure. Be sure to load paper

in the cassette 1.

3. Extend the output tray extension, then open the paper output support.

4. Press the

Setup

button, use the or button to select

Maintenance

, then press the

button.

LCD and Operation Panel

5. Use the or button to select

Nozzle check

, then press the

button.

The nozzle check pattern will be printed.

Examine the nozzle check pattern

161

Summary of Contents for MAXIFY iB4060

























































































































































































































































































































































































































































































































Search results

Summary of Contents for MAXIFY iB4060

Reviews:

Canon MAXIFY iB4060, Online Manual, Page: 161 / 504

Search results

Summary of Contents for MAXIFY iB4060

Reviews: