manualshive.com logo in svg

Canon MAXIFY GX2000 Series, Online Manual, Page: 577 / 693

Share
Download
Canon MAXIFY GX2000 Series Online Manual Download Page 577

Connecting with Wireless Direct

You can connect devices (e.g. computer, smartphone, or tablet) to the printer by two methods below.

• Wireless connection (connecting devices via a wireless router)

•

• Direct wireless connection (connecting devices directly without a wireless router)

•

This section describes Wireless Direct, which allows you to print by connecting the devices to the printer
directly.

Important

• You can connect up to 5 devices to the printer at the same time with Wireless Direct.

•

• Check the usage restrictions and connect the printer to the Wireless Direct.

•

Restrictions

• Some printers support IEEE802.1X/EAP (WPA/WPA2/WPA3 Enterprise). If you enable Wireless Direct

•

while IEEE802.1X/EAP (WPA/WPA2/WPA3 Enterprise) is enabled, IEEE802.1X/EAP (WPA/WPA2/
WPA3 Enterprise) is disabled.

When IEEE802.1X/EAP (WPA/WPA2/WPA3 Enterprise) is enabled, enable 

Administrator mode

 so

that the Wireless Direct settings cannot be changed.

Connecting a smartphone/tablet/computer
to the printer

1.

Enable Wi-Fi function on smartphone/tablet/computer.

1.

Enable Wi-Fi in the Settings menu on your smartphone/tablet/computer.

For instructions on enabling the Wi-Fi function, refer to the instruction manual for your smartphone/
tablet/computer.

2.

Select 

 (

Setup

) on 

HOME

 screen.

2.

577

Summary of Contents for MAXIFY GX2000 Series






















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments