Canon MAXIFY GX2000 Series Online Manual Download Page 118

Page: 118 / 693

Performing/Changing Wi-Fi Settings

Follow the procedure below to perform/change Wi-Fi settings.

Important

• Enable Easy wireless connect (Cableless setup) before performing printer setup. (Not required if you

change the IP address.) For details, search for "NR049" on your printer's online manual and see the
page shown.

• If you plan to use a printer over Wi-Fi, make sure you perform security settings for the Wi-Fi network.

Note

• For some models, you can perform network setup for a USB connected printer using Wi-Fi Connection

Assistant. Select

USB

Switch View

under the

View

menu to display printers.

Start up Wi-Fi Connection Assistant.

Check the displayed message and select

Yes

Select

Printer Network Setup

on the displayed screen.

Detected printers are listed.

Select printer to perform/change settings from printer list.

Select the printer with

Wi-Fi

displayed on

Connection Method

and

Available

Requires Setup

displayed on

Status

to perform settings.

You can perform settings for a printer with

Available

Requires Setup

not displayed on

Status

via

USB connection.

To perform setup for a USB connected printer, select

USB

from the pulldown menu on the toolbar and

select the printer to perform/change settings.

Select

Network Settings...

Printer Settings

menu.

The

Confirm Printer Password

screen appears.

For more on the password, refer to Administrator Password.

Note

• Clicking the

icon allows you to perform/change settings.

• If you select a USB connected printer on step 4 and the selected printer is compatible with wired

•

LAN, the screen below appears after the

Confirm Printer Password

screen appears

118

Summary of Contents for MAXIFY GX2000 Series






















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MAXIFY GX2000 Series

Reviews:

Canon MAXIFY GX2000 Series, Online Manual, Page: 118 / 693

Search results

Summary of Contents for MAXIFY GX2000 Series

Reviews: