Canon mageRUNNER ADVANCE C5240i, User Manual

Page: 12 / 424

10 Preface 1
Legal Notices
Product Name
Safety regulations require the product’s name to be
registered. In some regions where this product is sold,
the following name(s) in parenthesis may be registered
instead.
•
imageRUNNER ADVANCE C5255/C5255i, imageRUNNER
ADVANCE C5250/C5250i (F160400)
•
imageRUNNER ADVANCE C5240i, imageRUNNER
ADVANCE C5235i (F160700)
EMC requirements of EC Directive
This equipment conforms with the essential EMC
requirements of EC Directive. We declare that this product
conforms with the EMC requirements of EC Directive at
nominal mains input 230 V, 50 Hz although the rated
input of the product is 220 to 240 V, 50/60 Hz. Use of
shielded cable is necessary to comply with the technical
EMC requirements of EC Directive.
Laser Safety
This Product is certifi ed as a Class 1 laser product under
IEC60825-1:2007 and EN60825-1:2007. This means that
the product does not produce hazardous laser radiation.
Since radiation emitted inside the product is completely
confi ned within protective housings and external covers,
the laser beam cannot escape from the machine during
any phase of user operation.
Do not remove protective housings or external covers,
except as directed by the equipment’s manual.
Additional Information
When servicing or adjusting the optical system of
the product, be careful not to place screwdrivers or
other shiny objects in the path of the laser beam. Also,
accessories such as watches and rings should be removed
before working on the product.
The refl ected beam, even though visible or invisible, can
permanently damage your eyes.
The label shown below is attached to the paper drawer’s
right cover and toner supply port cover.
This Product has been classifi ed under IEC60825-1:2007
and EN60825-1:2007, which conform to the following
classes;
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL Á LASER DE CLASSE 1
APPARECCHIO LASER DI CLASSE 1
PRODUCTO LÁSER DE CLASE 1
APARELHO A LASER DE CLASSE 1
LUOKAN 1 LASER-TUOTE
LASERPRODUKT KLASS 1
Use of controls, adjustments, or performance of
procedures other than those specifi ed in the manuals
for this machine may result in hazardous radiation
exposure.
International ENERGY STAR
Program
As an ENERGY STAR® Partner,
Canon Inc. has determined
that this machine meets the
international ENERGY STAR
Program for energy effi
ciency.
The International ENERGY
STAR Offi
ce Equipment
Program is an international
program that promotes energy
saving through the use of
computers and other offi
ce
equipment. The program
backs the development and
dissemination of products
with functions that eff ectively
reduce energy consumption.
It is an open system in which
business proprietors can
participate voluntarily. The
targeted products are offi
ce
equipment, such as computers,
displays, printers, facsimiles,
and copiers. The standards
and logos are uniform among
participating nations.
IPv6 Ready Logo
The protocol stack included
in this machine has obtained
the IPv6 Ready Logo Phase-1
established by the IPv6 Forum.