92
Multiple flash shooting can be performed
not only with slave C but also with slave
A and B. For an outline of controlling
flash, see “Group Control” on page 84.
Multiple flash shooting can be performed
with flash heads A and B as well as the
slave unit(s) firing at the same output, or
with only slave A or B added, regardless
of the slave’s firing group settings.
1
Set <
l
> and <
6
>.
Press the <
,
> button.
Turn <
9
>, select <
W
>, then
press <
8
>.
2
Set and position slave A, B, and
C.
Check that the same transmission
channel is set for all slave units and
the master unit.
Set slave units as A, B, or C
respectively and place them in
position.
a
: Advanced Multiple Flash
Photography with Slaves A, B, and C Added
A
B
C
