manualshive.com logo in svg

Canon Macro Twin Light MT-26EX-RT, Instruction Manual

Share
Download
Canon Macro Twin Light MT-26EX-RT Instruction Manual Download Page 69

69

This section describes multiple flash 
shooting with slave C added to flash 
heads A and B.

1

Set the flash mode to <

a

>.

 

Press the <

E

> button.

 

Turn <

9

>, select <

Q

>, then 

press <

8

>.

2

Set <

l

> and <

6

>.

 

Press the <

,

> button.

 

Turn <

9

>, select <

W

>, then 

press <

8

>.

3

Check the transmission channel and wireless radio ID.

 

If the channels of the master unit and slave unit are different, 
set them both to “AUTO” or set them to the same number 
(p.65).

 

If the wireless radio ID of the master unit and slave unit are 
different, set them to the same number (p.65).

4

Set slave C and position it.

 

Set the firing group of the slave unit to C, and position the unit 
within the range shown on page 58.

a

: Multiple Flash Photography with 

Slave C Added

C

Summary of Contents for Macro Twin Light MT-26EX-RT

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands