Canon LX-P5510 User Manual Download Page 18

Page: 18 / 285

Chapter 1 Basic Operation

Turning the Printer Off

Make sure the printer is not operating.

Press the Power key for at least 1 second.

PAUSE

When the power lamp stops blinking, the printer is turned off.

Note

• When a given length of time elapses after switching to sleep mode, the printer is

automatically turned off.

(

→

P.108)

Important

• Make sure the power lamp is off before removing the power plug. Removing the power plug

while the power lamp is lit or blinking could result in a dry print head, paper jams and/or

poor quality prints.

• If the printer will not be used for a long period of time, disconnect the power cord, and

interface cable.

Summary of Contents for LX-P5510






























































































































































































































































































Search results

Summary of Contents for LX-P5510

Reviews:

Related manuals for LX-P5510

Brands by name

Popular brands

Canon LX-P5510, User Manual

Search results

Summary of Contents for LX-P5510

Reviews:

Related manuals for LX-P5510

Brands by name

Popular brands